Product Information
- Fits GM B-Body Models: Bel-Air, Caprice, Impala, Biscayne, Le Sabre, Catalina, Bonneville, Delta 88, Starfire, Delmont, Grand Prix, Wildcat, Executive, Dynamic 88, Jetstar 88, Kingswood,
- Fits Years: 69-70
- Fits Transmissions: TH400 Short Tail, TH375, 2004R
- A new transmission mount is recommended.
- For the 1969-1970 B-Body frames the distance between the crossmember frame mounting holes is 54". To ensure proper crossmember selection be sure to measure your frame before you order.
- Note: 1969 – 1970 B-Body must have the OEM factory 2 sets of crossmember mounting angles on each frame rail. This application will utilize the rearward set.
- Fits GM B-Body Models: Bel-Air, Caprice, Impala, Biscayne, Le Sabre, Catalina, Bonneville, Delta 88, Starfire, Delmont, Grand Prix, Wildcat, Executive, Dynamic 88, Jetstar 88, Kingswood,
- Fits Years: 69-70
- Fits Transmissions: TH400 Short Tail, TH375, 2004R
- A new transmission mount is recommended.
- For the 1969-1970 B-Body frames the distance between the crossmember frame mounting holes is 54". To ensure proper crossmember selection be sure to measure your frame before you order.
- Note: 1969 – 1970 B-Body must have the OEM factory 2 sets of crossmember mounting angles on each frame rail. This application will utilize the rearward set.
We engineer bold solutions that make installation easier without sacrificing quality. Get more support from G Force.
Our engineers are also car enthusiasts—which makes designing automotive parts second nature. Because we use our products, we know the importance of crafting them with strength and durability. Get more performance from G Force.
Specifications
Weight: 37 lbsShipping Dimensions: 57 × 11 × 6 In
Finish: Black Powder Coated
Mounting Hardware: Included
See the G Force Crossmember Overview for more info.
For vehicles originally equipped with 3/8″ crossmember bolts, open existing holes on the frame to 1/2″. If you prefer to retain 3/8″fasteners, upgrade the installatin hardware to Grade 8 bolts and hardened flat washers.
Some minor contact between the floorplan and the crossmember may occur due to body bushing settling and deterioration, or a bowed floor pan. Usually, this is not a problem. A hydraulic floor jack with a wood cushion will correct a bowed floor.
Discover more about the G Force Crossmember product line on these pages-