Product Information
- Fits GM B-Body Models: Bel-Air, Caprice, Impala, Biscayne, Le Sabre, Catalina, Bonneville, Delta 88, Starfire, Delmont, Grand Prix, Wildcat, Executive, Dynamic 88, Jetstar 88, Kingswood,
- Fits Years: 69-70
- Fits Transmissions: T-56, T-56 Magnum, T-56XL, Magnum XL, TR6060
- Note: If your car was OEM equipped with a TH400 or has two sets of trans-crossmember mounting brackets on each frame rail, then this crossmember will also accommodate your TH400 or 2004R transmission.
- For a proper fit with these transmissions, the GF-GMATM Transmission Mount is included.
- For the 1969-1970 frames the distance between the crossmember frame mounting holes is 54". To ensure proper crossmember selection be sure to measure your frame before you order.
- Note: 1969 – 1970 B-Body must have the OEM factory 2 sets of crossmember mounting angles on each frame rail. This application will utilize the rearward set.
- Fits GM B-Body Models: Bel-Air, Caprice, Impala, Biscayne, Le Sabre, Catalina, Bonneville, Delta 88, Starfire, Delmont, Grand Prix, Wildcat, Executive, Dynamic 88, Jetstar 88, Kingswood,
- Fits Years: 69-70
- Fits Transmissions: T-56, T-56 Magnum, T-56XL, Magnum XL, TR6060
- Note: If your car was OEM equipped with a TH400 or has two sets of trans-crossmember mounting brackets on each frame rail, then this crossmember will also accommodate your TH400 or 2004R transmission.
- For a proper fit with these transmissions, the GF-GMATM Transmission Mount is included.
- For the 1969-1970 frames the distance between the crossmember frame mounting holes is 54". To ensure proper crossmember selection be sure to measure your frame before you order.
- Note: 1969 – 1970 B-Body must have the OEM factory 2 sets of crossmember mounting angles on each frame rail. This application will utilize the rearward set.
We engineer bold solutions that make installation easier without sacrificing quality. Get more support from G Force.
Our engineers are also car enthusiasts—which makes designing automotive parts second nature. Because we use our products, we know the importance of crafting them with strength and durability. Get more performance from G Force.
Specifications
Weight: 40 lbsShipping Dimensions: 57 x 11 x 6 In
Finish: Black Powder Coated
Mounting Hardware: Included
See the G Force Crossmember Overview for more info.
This crossmember is installed with the G Force label facing the rear of the vehicle. However, another determining feature is the crossmember center tube which has a 1/2″ drain slot that is positioned on the bottom and on the passenger side next to the hump weldment.
This crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
To use the provided 7/16″ hardware it is necessary to enlarge holes in your frame rails with a 1/2″ drill. If you choose to use the stock size 3/8″ hardware, it is strongly recommended to use new Grade #8 fasteners to compensate.
Discover more about the G Force Crossmember product line on these pages-